CUSTOM MEGA PROSTHESISTM & EAGLE MODULAR PROSTHESIS
TOTAL SOLUTION FOR BONE RECONSTRUCTION
for
BONE TUMORS & TRAUMA
for
BONE TUMORS & TRAUMA
-
INTRODUCTION-CUSTOM MEGA PROSTHESIS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Custom Mega Prosthesis®is an indigenously designed, developed and manufactured orthopaedic implants used for reconstruction of musculo-skeletal system following resection for bone tumors and trauma.It offers a wide range of highly specializied and exclusive product and is available for almost all the anatomical regions of the body, with about 30 different models to suite patients need.
SADDLE PROSTHESIS WITH JOURNAL BEARINGCode: 01
The saddle prosthesis with journal bearing is an innovatively designed prosthesis for patient who is affected by the acetubulum tumour. This gives the patients movement, durability/ The UHMWPE gives longevity to the prosthesis by preventing the metal to metal wear and tear.
Material available : Titanium Alloy & Stainless Steel
PROXIMAL FEMORAL PROSTHESISCode: 02 Design No. 189514
Proximal femur prosthesis, as the name implies is designed to replace the proximal portion of the femoral bone including the femoral head. The proximal femoral prosthesis designed by us not only replaces the femoral head but also any required length of the femoral bone.
Material available : Titanium Alloy & Stainless Steel
DISTAL FEMORAL PROSTHESIS WITH THRUST BEARING POLYMER PAD & ROTATING AXIS MECHANISCode: 03 Patent no. : 196333 Design no. : 191946
This unique prosthesis mimics the physiological action of the distal part of the femoral bone and retains the functional aspects of the distal femoral bone along with the knee joint permits rotating movement 6º on either side.
Material available : Titanium Alloy & Stainless Steel
DISTAL FEMORAL PROSTHESISCode: 04
Distal femur prosthesis with thrust bearing pad mechanism is designed to replace the portion of the femoral bone adjoining the knee joint.
Material available : Titanium Alloy & Stainless Steel
PROXIMAL TIBIAL PROSTHESIS WITH KNEE JOINTCode: 06
Proximal tibial prosthesis is designed to replace the proximal tibial bone including the knee joint. It consists of a femoral stem, medium component with thrust pad, tibia head and shaft of tibia with tapering stem, pivot pin, collar bushes and screw. The femoral component seats in the proximal head and the tibial system replaces the salvaged proximal tibia bone. This acts as a pivot hinge and allows 140º movements dorsally. The condylar head contains a groove for patella in its anterior surface and femur stem angled at 6º according to the region.
Material available : Titanium Alloy & Stainless Steel
PROXIMAL TIBIAL PROSTHESIS WITH WEIGHT BEARING POLYMER PAD MECHANISMCode: 07 Patent no. : 198869 Design no. : 189140
The proximal tibial prosthesis with weight bearing poly pad mechanism is an endoprosthesis that is designed to replace the proximal part of the tibia bone. The tibial condylar head with shaft replaces the salvaged portion of the tibial bone along with the knee joint.
Material available : Titanium Alloy & Stainless Steel
TOTAL KNEE JOINTCode: 09
It is a revision prosthesis which differs from the locally available prosthesis. It comprises of a femur condylar head with tapered stem, thrust bearing pad, two collared buses, pivot pin, and locking screw.
Material available : Titanium Alloy & Stainless Steel
DISTAL TIBIAL PROSTHESIS WITH ANKLE JOINTCode: 10 Patent no. : 201520 Design no. : 189515
This is a novel invention to replace the distal bone with ankle joint while replacing the tibia bone it retains the functional aspects of the distal tibial bone along with foot
Material available : Titanium Alloy & Stainless Steel
INTERCALARY PROSTHESIS (MIDSHADFT REPLACEMENT)Code: 11 Design no. : 198601
Intercalary prosthesis is, as they are called as additional or supplementary to other prosthesis designs, and are made to serve a simple basic function of a reconstructive device. The segmental defects of the bone that may need resection can be easily reconstructed with an intercalary prosthesis which resembles a spacer like device. The intercalary prosthesis can be customized to suit any segmental region without flexion.
Material available : Titanium Alloy & Stainless Steel
PROXIMAL HUMERUS PROSTHESISCode: 12 Design no. : 189513
The special system for the upper extremity offers the opportunity of a proximal humerus reconstruction. It is innovatively designed to reconstruct the proximal side of the humeral bone with shoulder head. It has a shoulder head, extension shaft with stem. The shoulder head is designed according to the patient’s actual glenoid cavity and the extension shaft is designed according to the humeral bone length and diameter upto the resection portion of the affected bone. The extension shaft has a stem that is fixed with the marrow of the intramedullary humeral bone.
Material available : Titanium Alloy & Stainless Steel
DISTAL HUMERUS PROSTHESIS WITH ELBOW JOINTCode: 13 Patent no. : 218891 Design no. : 191945
A surgically implantable distal humeral prosthesis with elbow joint and oscillating mechanism replaces the distal part of the humerus along with the elbow joint. It resembles the anatomy of the condylar region of the distal humerus bone and retains the functional aspect of the distal part of humeral bone.
Material available : Titanium Alloy & Stainless Steel
PROXIMAL ULNA PROSTHESIS WITH ELBOW JOINTCode: 14 Patent no. : 219664 Design no: 196980
This endoprosthesis replaces the upper part of the ulna and matches in profile with the anatomic region of the distal humerus with elbow and proximal ulna.
Material available : Titanium Alloy & Stainless Steel
DISTAL RADIAL PROSTHESIS WITH WRIST JOINTCode: 15 Patent no. : 202044 Design no. : 204685
The distal radial prosthesis with wrist joint, is an endoprosthesis that is used after excision of bone tumours around the wrist joint. It retains the functional aspects of the distal radial bone along with the wrist joint for maintaining the optimum function of the hand.
Material available : Titanium Alloy & Stainless Steel
DISTAL RADIAL WITH WRIST AND METACARPELS PROSTHESISCode: 16 Design no. : 198602
The distal radial with wrist and metacarpals prosthesis has been developed and manufactured by us, for the 1st time outside the US and EU countries. It is novel design constructed to partially replace the finger bones along with the wrist portion of the radial bone. This provides the actual physiological movement of the palm with fingers.
Material available : Titanium Alloy & Stainless Steel
PROXIMAL INTER PHALANGEAL JOINT PROSTHESISCode: 17
It consists of the shaft of the proximal phalanx with two short stem at each end fixed by screws to facilitate flexion and extension at the joints above and below. The lower stem is fixed into the middle phalanx and the upper one is fixed into the corresponding metacarpal.
Material available : Titanium Alloy
EXPANDABLE PROXIMAL FEMORAL PROSTHESISCode: 18
The expandable proximal femoral prosthesis is mainly used for pediatric patients, where length of the femoral bone should be increased after surgery. The surgeon can increase the length of 6 to 10mm at a time, when required to meet the growing demands of the patients. The total length of the prosthesis can be expanded upto 120mm. The expandable proximal femoral prosthesis is unique and more advance than the commercially available hip joint prosthesis.
Material available : Titanium Alloy
EXPANDABLE DISTAL FEMORAL PROSTHESISCode: 19 Design No: 196981
The expandable distal femoral prosthesis is mainly used for pediatric patients, where length should be increased after surgery. Expandable mechanism as described in Expandable proximal femoral prosthesis (serial no.18)
Material available : Titanium Alloy
EXPANDABLE PROXIMAL TIBIAL PROSTHESISCode: 20 Design No: 196982
The expandable proximal tibia prosthesis is mainly used for pediatric patients, where length should be increased after surgery. Expandable mechanism as described in expandable proximal femoral prosthesis (serial no.18)
Material available : Titanium Alloy
EXPANDABLE DISTAL TIBIAL PROSTHESISCode: 21
The expandable prosthesis is mainly used for pediatric patients, where length should be increased after surgery. Expandable mechanism as described in expandable proximal femoral prosthesis (serial no.18)
Material available : Titanium Alloy
EXPANDABLE PROXIMAL HUMERUS PROSTHESIS WITH SHOULDER JOINTCode: 22
This expandable prosthesis is mainly used for pediatric patients where length should be adjusted after surgery. Expandable mechanism as described in expandable proximal femoral prosthesis (serial no.18)
Material available : Titanium Alloy
EXPANDABLE DISTAL HUMERUS PROSTHESIS WITH ELBOW JOINTCode: 23
The expandable prosthesis is mainly used for pediatric patients, where length should be increased after surgery. Expandable mechanism as described in expandable proximal femoral prosthesis (serial no.18)
Material available : Titanium Alloy
TOTAL FEMORAL PROSTHESIS (LENGTH ADJUSTMENT)Code: 24 Design No. 204687
This prosthesis is innovatively designed to reconstruct the femur bone along with hip & knee joint. It is a combination of two indigenous designs of proximal femur and distal femur with knee joint.
Material available : Titanium Alloy & Stainless Steel
TOTAL TIBIAL PROSTHESISCode: 25 Design no. : 204686
The total tibial prosthesis is an innovatively designed to replace the total tibia bone, the total tibia is a combination of proximal tibia with knee joint and distal tibia with ankle joint prosthesis.
Material available : Titanium Alloy & Stainless Steel
TOTAL HUMERUS PROSTHESIS WITH ELBOW JOINTCode: 26
The special system for the upper extremity offers the opportunity of a proximal humerus reconstruction. It is innovatively designed to reconstruct the total humeral bone with shoulder head and elbow joint. It has a shoulder head, extension shaft, and distal humeral component. The shoulder head is designed according to the patient’s actual glenoid cavity and the extension shaft if designed according to the humeral bone length and diameter upto the resection portion of the affected bone. The distal humeral head with intermediate shaft, condylar head, oscillating components, proximal ulna stem provides a rotating movement of 0-50º which corresponds to rotary movements of the forearm and the hinge mechanism imparts articulating motion of the elbow joint. This prosthesis permits flexion movement of 0-1700 dorsally. Thus stimulating the normal movement of the elbow joint. The humeral shoulder head in anterior view with the elbow head in lateral view have an angle of 85º.
Material available : Titanium Alloy & Stainless Steel
TOTAL RADIAL PROSTHESIS WITH ELBOW JOINTCode: 27
This radial prosthesis is designed & constructed to replace the entire radial bone with the elbow joint and it retains the functional aspects of the radial bone along with the elbow joint.
Material available : Titanium Alloy
EXPANDABLE TOTAL FEMORAL PROSTHESISCode: 28
The expandable prosthesis is mainly used for pediatric patients, where length should be increased after surgery. Expandable mechanism as described in expandable proximal femoral prosthesis (serial no.18)
Material available : Titanium Alloy
EXPANDABLE TOTAL HUMERUS PROSTHESIS WITH ELBOW JOINTCode: 29
The expandable total humerus prosthesis with elbow joint is mainly used for pediatric patients, where length should be increased after surgery. Expandable mechanism as described in expandable proximal femoral prosthesis (serial no.18)
Material available : Titanium Alloy
TOTAL RADIAL PROSTHESIS WITH ULNA FIXING ARMCode: 30
The innovatively build novel custom built endoprosthesis is used to replace the entire radial bone without replacing the elbow joint. This invention avoids the unnecessary replacement of elbow joint where is not affected by tumour.
Material available : Titanium Alloy & Stainless Steel